Custom Business Vehicle Lettering - Van & Truck Doors, Side Panels & Rear Decals VHL100

Letter your work van or truck the way the pros do: matching doors, both side panels, the rear and truck bed sides. Type your business name and up to 4 more lines, turn on the pieces you need, pick which lines go on each piece, and see every piece sized to fit before you order. Model number VHL100.

Pick Your Pieces

• Doors (pair): one for each front door, up to 30 inches wide.
• Driver side panel: up to 96 inches long.
• Passenger side panel: set its own length, since the sliding-door side is usually shorter.
• Rear doors or tailgate: up to 96 inches.
• Truck bed sides (pair): a long, low strip for each side of the bed. Set the length and the height you have.

Each piece gets only the lines you check for it, like your name, phone and website on the doors and everything on the sides. Each piece shrinks to fit the space you set.

Pricing

Each piece is priced by its finished width, plus $5 for each smaller line under the business name on that piece.

• Door pair: 12 in $20, 18 in $25, 24 in $30, 30 in $35
• Side or rear panel: 12 in $15, 18 in $20, 24 in $26, 30 in $33, 36 in $40, 48 in $52, 60 in $62, 72 in $72, 84 in $82, 96 in $92
• Truck bed pair: 24 in $30, 36 in $40, 48 in $50, 60 in $60, 72 in $70

Want to see it first? Check the proof box and we will email a proof before we cut. Need it longer than 96 inches or a full wrap? Text us at (231) 412-7660 for a quote.

Details

• Die-cut from outdoor vinyl rated 5 to 7 years
• Gloss vinyl in your choice of color from our color chart
• Pre-spaced and pre-masked, ready to apply
• Shipping calculated at checkout

How to Install

1. Wash the area, then wipe it with rubbing alcohol and let it dry.
2. Measure and level each piece, then tape the top edge to make a hinge.
3. Flip it up, peel off the backing, and lay it down slowly while pressing with a squeegee from the center out.
4. Rub firmly over every letter, then peel the clear transfer tape off slowly at a sharp angle.

FAQ

What letter height should I pick? 6 to 8 inches for the business name on the sides reads well from across the road. The doors come out smaller to fit.

Do you have other fonts? Yes. Type the name of any font from our font chart in the builder and we will cut it in that font.

Do I need USDOT numbers? See our USDOT truck door lettering if your truck needs them.