This helmet flame paint stencil is a sweeping flame with a curved front and long trailing licks. It is cut to order from low-tack paint mask film in five sizes, from 10 x 23 to 28 x 60 inches, for crisp flames on hoods, side panels, fenders and tanks.
How to Order
Pick a size and a mask type. Negative: the flames are weeded out and you paint inside them. Positive: the flames stay masked and you paint around them, great for ghost flames. The size is the overall flame design, and a 1 inch mask border is added on every side. Doing both sides of a vehicle? Order 2 and type MIRROR in the Additional Information box for a reversed second stencil.
What You Get
- Model Number: FPM107 (Sweeping Helmet Flame)
- One paint mask stencil in your size and mask type
- Transfer tape over the top to hold its shape
- 1 inch mask border on every side
- Free squeegee and instructions
Premium Quality Materials
Low-tack paint mask film holds a crisp edge while you spray, then peels away clean without pulling fresh paint or leaving residue. It works with rattle cans, automotive paint, airbrush and Plasti Dip. Skill level: Intermediate, with smaller flame tips and more repeats, a good step up for most DIY painters.
How to Install
- Clean the panel with wax and grease remover.
- Position the stencil and tape the top edge as a hinge.
- Squeegee from the center out and press every edge down.
- Peel off the transfer tape at a sharp angle.
- Mask the rest of the panel with tape and paper.
- Spray light coats so paint does not bleed under the edges.
Care & Removal
Peel the mask once the paint is tack-dry, slowly and at a low angle. Never leave it on through baking or a full cure. Each stencil is single use.
Perfect For
Sized for helmets, fuel tanks, fenders and anywhere the classic flame look has to fit a smaller space. Built for hot rod builders, custom painters and DIY rattle-can painters.
Frequently Asked Questions
What sizes does the Helmet Flame Paint Stencil come in?
Five sizes: 10 x 23, 14 x 30, 22 x 36, 22 x 48 and 28 x 60 inches. The size is the flame design itself, and the mask sheet adds a 1 inch border on every side, so a 22 x 36 arrives on a 24 x 38 sheet.
What is the difference between negative and positive?
Negative is weeded so you paint the flames. Positive keeps the flames masked so you paint the area around them, which is how ghost flames and two-tone looks are done.
Can I use it on both sides of my vehicle?
Each stencil is single use and only faces one way. Order a quantity of 2 and type MIRROR in the Additional Information box to get a reversed stencil for the other side.
Do I need anything else to paint?
Masking tape and paper to protect the rest of the panel, wax and grease remover, and your paint. The squeegee is included.
Why Choose Sticker Chef
Family owned and operated in Michigan since 2008, Sticker Chef cuts every stencil to order in our own shop and ships UPS with tracking. Every order is backed by our 100% satisfaction guarantee and 30-day no-hassle returns.